As with any quality product, proper care will enhance and prolong the usefulness of your ScorpionEXO® product and protect your investment. Your ScorpionEXO® Product is engineered and assembled with state-of-the-art technology including exclusive patents and proprietary trademarked features.
Machine wash cold.
Hang to dry.
Cool iron if needed.
Do not bleach.
Professional leather cleaning only.
Never use any solvents or abrasive cleaners to clean your helmet!! For optimum performance, rinse your helmet in warm water using a mild soap. If the outside is dirty with dried dirt and bugs, we suggest you place a wet towel over the helmet for at least one minute before wiping it clean. This softens the foreign objects before removal lessening the chance of scratches. Plastic polishes like Plexus or Honda polish will work fine to restore luster to your helmet as long as the dirt, grime and bugs have not been "scraped off" dry.
The multiple coatings on the face shield are resistant to light scratching, however, heavy, abusive scratching can break through the coatings and cause visible marks. Removing dirt and bugs with good cleaning practices and keeping your helmet in a RaceCase™ will significantly help to prolong the life of your helmet and face shields.
The removable, washable liner in all our helmets make it easy to clean. Even a man can do it. Remove the cheek pads first by unsnapping the 3 (usually) button snaps on each one. Be careful not to "tear" the pad out, but carefully un-snap each button. The "crownliner" can be unsnapped (2) from the back of the head area and the pulled away from the helmet in the forehead area. Note the alignment arrows for re-installing the crownliner. Throw these three pieces into the washing machine and allow to air dry before re-installing.
The ScorpionExo® face shields have different cleaning procedures for inside and outside. The outside is coated with an anti-scratch coating which prevents minor scratches, but cannot resist heavy wiping and cleaning without preliminary softening of the dirt, grime and bugs first. Note the damp towel method of softening dried bugs and dirt above. Plastic polishes work fine (clear and smoke shields only) to clean the outside of the shield as long as the dirt and grime has been softened and removed first. The inner Everclear® no-fog coated face shields required special treatment for cleaning. We suggest using a warm water and mild soap combination followed by "pat drying" with a dry towel. "Wiping" may cause premature wear and scratching on the Everclear® innercoating. Mirrored shields should use warm water only.
Certain common household chemicals will react negatively with the polycarbonates, fiberglass or coatings of your helmet. Avoid contact with acetone (nail polish remover), caustic solutions (ammonia-based cleaners), hair sprays containing methyene, chlorine from swimming pools or glues.
Scorpion Sports offers special low-cost repairs or replacement parts to keep your helmet in excellent working condition. Please give us or your local dealer a call. Our warranty and repair department can be reached Pacific Coast business hours at 1-888-212-0688.
Place your helmet into a suitably protected box and send via FedEx, USPS, or UPS, registered or insured to;
Scorpion Sports Inc.
ATTN: Warranty Dept.
10425 Slusher Drive
Santa Fe Springs, CA 90670